Safety Light Hand Protection

Next > >

<< Previous

Send Inquiry

Product Code : 04

Product Description

Safety Light Hand Protection

DETAILS

Infra systems, offers new generation Safety Light Curtains / Safety Guards based on advanced micro controller technology. For the same protected height, Cross Beam Light Curtains are more sensitive as there are more number of active beams in the same area.

Feature

Easy to install & can be mounted in any position. Vertical / Horizontal.
Non Critical alignment between Emitter & Receiver.
Blanking / By-Passing individual channel is provided through software.
System operation is unaffected by mains power fluctuations.
Machine OFF if screen is too dirty or oily.
Barrier operates on cyclic scanning photo-electric infra-red techniques.
Various barrier heights are available for covering 90 mm to 1890 mm .
Higher covering heights available upon request.
Use of solid state components & special construction technique ensures that barrier is not affected by normal vibrations & shocks.
Sensor connections are provided through plug in connectors.
Self Checking Circuitry with two outputs continuously monitors failure of any of the beam in the system and stop the machine if failure is detected.
LED Indications are provided for status indication of each channel.
LED indications are also provided for each output.
Choice for suitable Control Unit available as per different working conditions.
Flexible fixing arrangements to suit individual requirement.
Increases productivity while maintaining required safety.

Specification

Power Supply	12 - 24 Volts DC
Supply Protection	NReverse Polarity Protected
Output	PNP or NPN / NO or NC
Output Indications	Through LEDs
channel Indication	LED indication for each channel
Response Time	On to Off : 10 - 15 m sec. Off to On : 50 - 100 m sec
No of beams	4, 6, 8, 10 , 16, 20, 16, 24, 32, 40, 48, 56, 64
Beam By Pass	Provided in hand/body protection models
Protected Heights	150-1500 mm
Pitch offered	20, 30,40, 50, 90mm
Adjustable Range	Up to 3 meters (Higher range up to 40 meters available)
Standard Cable length	5 meters for emitter, 3 meters for receiver
Operating Temperature	Up to 55 Degrees centigrade
Cross Section	36 x 42 mm
Electrical Connections	Plug in Connector for Emitter & Receiver
Applicable to	Directly work with PLCs / Controllers
Protections	Output short circuit protected.
Suitable for	Machines with quick emergency stop

Models

MODEL	OVERALL HEIGHT(MM)	PROTECTED HEIGHT(MM)	NO OF BEAM	CROSS BEAM	PITCH(MM)
SLC - 0620	180	100	6	16	20
SLC - 1220	300	220	6	16	20
SLC - 1820	420	295	30	52	20
SLC - 2420	540	460	24	70	20
SLC - 3020	660	580	30	88	20
SLC - 3620	780	700	36	106	20
SLC - 0630	250	150	6	16	30
SLC - 1230	430	320	12	34	30
SLC - 1830	610	510	18	52	30
SLC - 2430	790	690	24	70	30
SLC - 3030	970	870	30	88	30
SLC - 3630	1150	1050	36	106	30
SLC - 1640	600	690	40	16	20
SLC - 0640	300	200	6	6	40
SLC - 1240	540	440	12	34	40
SLC - 1840	780	680	18	52	40
SLC - 2440	1020	920	24	70	40
SLC - 3040	1260	1160	30	88	40
SLC - 3640	1500	1400	36	106	40
SLC - 0830	295	210	8	-	30
SLC - 0840	370	280	8	-	40
SLC - 1030	365	270	10	28	30
SLC - 1040	455	360	10	28	40
SLC - 1630	535	450	16	46	30
SLC - 1640	690	600	16	46	40
SLC - 1250	650	550	12	-	50
SLC - 1650	840	750	16	-	50
SLC - 1690	1440	1350	16	-	90

Application

Safety Light Curatins are used for preventing of hand / Finger / body part while working at : Power presses for metal, processing machine for wood , plastics, leather, rubber, glass etc. Filter Presses, Folding or Bending machines, Robots, Precessing Lines and welding presses , Insertion Machines, Palletizers, Handling and storage systems, Rubber molding machines, SPM's, Forging Presses, Injection Molding machines etc,